Among the four forms of conveyor Conveyor Hood Covers, the fixed cover and open close cover are made of galvanized corrugated steel plate or color coated steel plate. Generally, 9 fixed covers and 1 open close cover are set in every 10 cover positions, or the two covers can be arranged alternately. During installation, press the opening and closing cover on the left and right adjacent fixed covers, and its overlapping length is one wave distance or two wave distances. Pay attention to place the hinged side of the opening and closing cover on the non passing side of the conveyor, and the side with latch on the passing side of the conveyor.

The frame used to fix the conveyor cover is connecting angle steel or Z-shaped steel, and its length is equal to the installation length of the conveyor cover. Weld the connecting angle steel or Z-shaped steel on the channel steel or small angle steel on both sides of the conveyor frame. If the support angle steel needs to be installed, first weld the support angle steel on both sides of the frame, and then weld the connecting angle steel or Z-shaped steel on the support angle steel.

Install the Conveyor Hood Cover in a "product" shape from one end to the other end of the frame. During installation, no one is allowed to stand on the Conveyor Hood Cover, and do not hit or knock it with force.

Fix the Conveyor Hood Cover on the connecting angle steel or Z-shaped steel with self tapping screws, with at least 4 fixing points for each piece.

One observation Conveyor Hood Cover can also be installed every 10 pieces to facilitate maintenance and inspection.

The folding point cover is only used at the folding point of the convex arc section of the conveyor, while the deviation switch cover is specially set to cover the deviation switch. Both are covered on the fixed cover.

• The Galvanized Steel Sheet Conveyor Belt Hood Cover is made of galvanized plate. The Conveyor Hood Cover is also known as: belt conveyor Conveyor Hood Cover, FRP Conveyor Hood Cover, conveyor Conveyor Hood Cover, color steel plate Conveyor Hood Cover, FRP Conveyor Hood Cover, arc belt conveyor Conveyor Hood Cover, arc FRP Conveyor Hood Cover, conveyor color steel Conveyor Hood Cover and color steel Conveyor Hood Cover for users to choose, The Conveyor Hood Cover of conveyor can be selected according to various types of belt conveyor. The Conveyor Hood Cover of the conveyor produced by our company is light, beautiful and shaped by advanced and scientific flow machinery. The cover surface naturally forms dense circular arc arch stiffeners, which are evenly distributed. The whole cover is hyperbolic arch, with scientific design, high mechanical strength, precise bite between the top and bottom of the cover, and good wind resistance and waterproof performance.

• Conveyor Hood Cover is mainly used to reduce the loss and waste of goods during transportation, make the conveyor belt safer and more reliable during transportation, prolong the service life of the conveyor and play a great role in goods and environment.

• Purpose of Conveyor Hood Cover

• The Conveyor Hood Cover of belt conveyor is suitable for rainproof, dustproof and windproof of the conveyor belt of major factories and mining enterprises such as steel, cement, power generation, chemical industry, coal, port, ash plant and wharf. It can reduce the loss of goods in the transmission process, make the conveyor belt safer and more reliable in operation, and play a great role in purifying the environment.

The Galvanized Steel Sheet Conveyor Belt Hood Cover prevents the color steel plate from rolling into a circular arc after cold rolling with wavy grain, and is installed on the conveyor to protect the transportation machinery and equipment, increase the service life of the equipment, reduce the maintenance cost, improve the economic benefit, and prevent the spread of dust during material transportation and environmental pollution. In addition, it can also protect the equipment from the influence of positive functions such as sun and rain, anti weathering, noise reduction and conveyor belt aging. It has the advantages of simple installation, low price and great economic and social benefits.

The production process of the Conveyor Hood Cover includes tray, upper part, pressure, cutting, pressure arc, height adjustment, packaging and other steps.

Color steel Conveyor Hood Cover manufacturers do not prepare spot goods, and the delivery period is generally 3-5 days.

Installation instructions:

1. Check whether the spare parts are complete during installation.

2. If it is arranged irregularly according to the installation sequence

3. Please be careful not to stand on it during installation to prevent on-site staff from being injured.

4. When installing color steel rainproof film, please pay attention not to rely on the mechanical equipment of internal machines.