Orange Food Grade Side Clips Skirt Rubber Board

The High Temp Double Seal Skirting Rubber is mainly used for sealing between conveyor belt and guide chute and between buffer bed and guide chute. After years of on-site working condition investigation, BAI-OTT rubber has organized scientific research forces, gathered contemporary rubber technology and excellent product engineering design, and developed the latest installation convenience in the world, thus the conveyor skirt rubber board with multi protection system is integrated. The conveyor skirt rubber board is made of polyurethane and natural rubber, and the part in contact with the belt is polyurethane. It adopts the double-layer sealing integrated structure of straight plate and skirt edge. The straight plate is close to the side of the guide groove, and the bottom is in contact with the belt to prevent material overflow. The skirt sealing part of the skirt adopts unilateral arc transition. When the belt deviates, it will not hurt the belt and skirt, and can automatically restore to the original state.

Equipment structure:

The main part of the conveyor skirt rubber board is black, which is made of high-quality imported natural rubber and styrene butadiene rubber. On the basis of keeping it straight, it increases the elasticity, so that the Red Multi protection sealing strip is closely attached to the conveyor belt. Even when the multi protection system reaches the service life, it can continue to perform the responsibility of anti overflow skirt and protect the investment of users. Multi protection and anti overflow system, T-shaped fixed rubber block, and the skirt body is made of one-time integrated thermal vulcanization, with compact and effective structure, strong and durable. The T-shaped fixed rubber block on the back can be removed in the manufacturing process according to customer requirements to adapt to the old installation methods in the past. Using three sealing strips for sealing, the efficiency of anti overflow skirt is 200% higher than that of ordinary single rubber, and there are more sealing spaces than that of double sealing, and the efficiency is 100% higher. The revolutionary way of adding semi solidified lubricant to pure natural rubber (NR) solves the problem of high wear resistance of anti overflow skirt and easy damage to belt. The material has flexible texture and excellent elasticity, which avoids the disadvantage of polyurethane (PU) that is not resistant to water, and has high wear resistance without damaging the conveyor belt.

•  The overall anti overflow skirt adopts the double sealing structure of straight plate and skirt, with excellent sealing effect.

• Straight plate: its function is to block large particle materials. At the bottom of the straight plate, the part in contact with the belt is "herringbone" polyurethane, which has large volume and longer wear time.

• Skirt head: it is used to prevent dust overflow and is the most severely worn part. By adding special formula high-pressure casting polyurethane, the service life of anti overflow skirt is greatly improved. After actual use on site, the service life of anti overflow skirt is ≥ 1 year when the belt speed is 3.5m /'s.

• The ear section of skirt adopts natural rubber with good elasticity. By the action of this elastic force, the skirt head exerts appropriate pressure on the belt to keep the skirt head close to the belt all the time, so as to ensure that the dust does not overflow.

• The inner side of the skirt head adopts unilateral arc transition. When the belt deviates, it will not hurt the head of the belt and skirt. When the belt returns to normal, the skirt head will automatically return to its original state.

• The overall material has good elasticity, low temperature resistance and no cracking.

•  It has flame retardant and antistatic characteristics and is safer to use.

• The skirt at each side of the guide chute shall be made into a whole as required, which shall be the same length as the guide chute to prevent air leakage at the joint.

Installation method:

The installation method of conveyor skirt rubber board is particularly convenient. After confirming the installation position, fix the special fixing groove outside the blanking groove by welding, riveting and self tapping screws, and then slide the T-shaped rubber block on the back of the multi protection anti overflow skirt into the fixing groove The installation of double sealing anti overflow skirt outside the side plate of the guide chute can effectively prevent the scene of coal leakage and powder running on both sides of the guide chute, which plays an important role in reducing the dust concentration in the belt corridor and improving the environment. The double sealing anti overflow skirt produced by our company is made of polyurethane, modified wear-resistant rubber and natural rubber vulcanization. It is an ideal product for upgrading.

Installation instructions:

1. The gripper is used together with angle aluminum, and two sets of grippers are used per meter.

2. The height of anti overflow skirt can be adjusted according to the actual size of guide chute.

Angle aluminum (40mm) × 40mm) one-time pressing molding, material: all aluminum, beautiful appearance, no rust, it is a circular column, locked in the holder without falling off.The gripper adopts hot-dip galvanizing, with light weight, good anti-corrosion performance and no rust.The fastening bolt is made of stainless steel 304, which will never rust. It is suitable for use in dark, humid or even short-term water flushing environment.

Conveyor Skirting Rubber Board Size

Noted:Special size we can customized.