Tire Regrooving Machine is used to regroove tires and rubbers. You can make the width of the pattern different with different sizes of blades. It is high quality and improves your working efficiency a lot.

• Voltage-regulation for changing heat temperature, the screen display for voltage value.

• Instantly heating, nearly no need to wait for warm-up.

• Overtemperature protection, just change a new fuse to restart.

• The inching switch buffer can keep a good connection. refrain from Point-Point switch long time work will be a poor connection. 

• The pilot lamp is just light when heating.

• The heat radiating window and one more electric fan can make sure the machine has good heat radiating.

Operation Steps

1. Select the right size blade and install it onto the blade holder.

2. Insert the power plug into the qualified power socket.

3. If the pushing feels hard, please turn the voltage higher(C W), if the rubber fume quickly, please turn the voltage lower(A W).

4. Don't let the blade heat ceaselessly, please let the blade off the tire for seconds after minutes of working.

5. If the operation finishes or want to change another size blade, please let the blade free-cooling for 10 minutes, then collect or change the blade.

6. If the operation is finished, please draw the power plug by hand, do not pluck the power cable, and turn the voltage knob to the origin point.

7. Please keep the tire regroover into a toolbox or suitable place, make sure children can not catch it.

Malfunction and Solution

• When you find the screen is light but the blade not heated and the pilot lamp not light, the problem is the fuse fusing, so please turn the power off to change a new fuse on. 

• The machine is in working order and hard to push the handle, it is the temperature is lower, please turn the voltage knob to make the voltage higher(C W).

• The machine is in working order, but when the blade is cut into rubber, it fume at once, it is the temperature is higher, please turn the voltage knob to make the voltage lower(A W).

• If the power cable little fever when the tire machine is working, it is a normal phenomenon.

• If the power cable is damaged in a small area, please bind up it with qualified insulated tape. if it is serious damage, please contact the manufacturer or the after-sale service to deal with it.

• If the blade is heated when the machine standby, please turn the power off, then restart, if the problem continues, please contact the manufacturer or after-sale service center to deal with it.