The wire rope belt stripper is used to strip steel core conveyor belt. The machine is applied to separation of cover rubber and canvas, cover rubber and steel wire rope and canvas of various fabric cores and steel core conveyor belts.

The wire rope belt stripper is electric and easy to operate with its special design, which ensures the maximum productivity for you to do repairing and minimizes the downtime.

The stripper can save your worker costs and strength because there is no need to let workers to help splice the belt. The machine can do it by itself. 

The field of application: separation of covering rubber and canvas, covering rubber and steel wire rope, various fabric core canvas and steel wire rope core conveyor belt;

• The stripping area is large and the speed is fast, which can greatly reduce the labor intensity and reduce the time required for the joint;

• Light weight and easy to carry;

• Stable operation.

• The stripping area is large and the speed is fast, which can greatly reduce the labor intensity and reduce the time required for the joint;

• Light weight and easy to carry;

• Stable operation.

• There is no need to turn the belt, because the removal of the upper and lower cover glue of the steel wire rope can be completed at one time.

• The thickness of residual rubber on the steel wire can be controlled arbitrarily to ensure the vulcanization strength.

• Compared with the traditional manual stripping method, it is more convenient to operate, can save a lot of time and greatly reduce the labor intensity.

Application method of steel wire strip ordinary strip peeling machine:

1. According to the conventional method, the center line of the conveyor belt shall be connected with a knife joint to separate the first layer;

2. Place the conveyor head stripper in a proper position and fix it with steel wire rope.

3. Turn on the power supply;

4. Clamp the separated first layer with a clamp, start the motor, and cut off the stripped part at an appropriate position with a cutter;

5. After stripping the first layer, repeat the above relevant steps to strip the second layer, the third layer, etc.

Precautions for ordinary strip peeling machine of steel wire belt:

1. Connect the power supply and operate by professional electrician;

2. When in use, the head stripping machine shall be fixed to prevent slipping.

3. During stripping, the width shall not exceed relevant requirements

Technical parameters: